[Rivet] problems running rivet

[Hannes Jung]

Hi Andy

sure...
I am already using 1.5.0 ... 
and it works fine... and apart from the small tricky things, 
I am really impressed and happy with it... it's really a nice piece 
what you provided....
I like very much the rivet-mkhtml  command, that's really good....

Thanks a lot
Cheers
Hannes
On 13.03.2011, at 18:29, Andy Buckley wrote:

> Do you mean doing an installation into the build directory, i.e.
> "./configure --prefix=$PWD"? That's not a good idea on any sort of system!
> 
> Not sure why Rivet isn't loading plugin libraries from the current
> directory: there shouldn't be any reason for that not to work.
> 
> By the way, the path lookup has been made a bit more user friendly in
> the new 1.5.0 release: since there are also plenty of bug fixes and
> improvements, I recommend that you upgrade to that if you're not already
> using it.
> 
> Best wishes,
> Andy
> 
> 
> On 13/03/11 17:23, Hannes Jung wrote:
>> Hi Andy
>> 
>> sure... it does not depend on the name of the dir, it just needs to be a different name as from where I call it..
>> I think it is a feature of the mac.
>> I have a similar problem when using automake with install. If files 
>> are int he same directroy, it returns an error, whereas on a linus system it doesn't...
>> But, I have no idea, why it is so ...
>> 
>> Cheers
>> 
>> hannes
>> 
>> 
>> On 13.03.2011, at 18:20, Andy Buckley wrote:
>> 
>>> Do I understand that the analysis libraries can only be loaded on your
>>> Mac if they are located in a directory called "lib"? The directories
>>> specified in RIVET_ANALYSIS_PATH should be the ones in which the .so
>>> files are found, and we certainly don't hard-code any requirement that
>>> these directories be called "lib"!
>>> 
>>> Andy
>>> 
>>> 
>>> On 13/03/11 14:37, Hannes Jung wrote:
>>>> Dear  Hendrik et al
>>>> 
>>>> thanks a lot for your reply.
>>>> The problem was (again) the path name for RIVET_ANALYSIS_PATH.
>>>> It did not work with 
>>>> export RIVET_ANALYSIS_PATH=$PWD
>>>> but it works fine if the .so file is stored in the directory
>>>> $PWD/lib with
>>>> export RIVET_ANALYSIS_PATH=$PWD/lib   
>>>> 
>>>> Maybe this is a specific MAC feature.... 
>>>> 
>>>> Cheers
>>>> Hannes
>>>> 
>>>> 
>>>> 
>>>> On 13.03.2011, at 08:42, Hendrik Hoeth wrote:
>>>> 
>>>>> Dear Hannes,
>>>>> 
>>>>> Thus spake Hannes Jung (hannes.jung at cern.ch):
>>>>> 
>>>>>> after running successfully now the implemented Rivet analyses, I tried
>>>>>> the test example.  However I get again stuck with a seg fault. [...]
>>>>>> Any idea whether this comes from using rivet-nopy ?
>>>>> 
>>>>> My magic crystal ball is at the manufacturer's for repair, so you'd have
>>>>> to create an old-fashioned back trace in order to find the reason. It
>>>>> ain't that complicated, though. Run in gdb and type "bt" followed by
>>>>> "enter" after the seg fault occurred.
>>>>> 
>>>>> Cheers,
>>>>> 
>>>>> Hendrik
>>>>> 
>>>>> -- 
>>>>> It pays to be obvious, especially if you have
>>>>> a reputation for subtlety.    -- Isaac Asimov
>>>> 
>>>> ***********************************************************************
>>>> Hannes Jung 
>>>> Email: Hannes.Jung at cern.ch
>>>> mobile :+49 40 8998 93741
>>>> http://www.desy.de/~jung                                           
>>>> Tel: +49 (0) 40 8998 3741 (DESY)
>>>> Tel: +41 22 76 71691 (CERN)       
>>>> CERN - PH
>>>> 40-3 B11
>>>> CH-1211 Genève 23
>>>> Switzerland
>>>> ***********************************************************************
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Rivet mailing list
>>>> Rivet at projects.hepforge.org
>>>> http://www.hepforge.org/lists/listinfo/rivet
>>>> 
>>> 
>>> 
>>> -- 
>>> Dr Andy Buckley
>>> SUPA Advanced Research Fellow
>>> Particle Physics Experiment Group, University of Edinburgh
>>> 
>>> The University of Edinburgh is a charitable body, registered in
>>> Scotland, with registration number SC005336.
>>> 
>> 
>> ***********************************************************************
>> Hannes Jung 
>> Email: Hannes.Jung at cern.ch
>> mobile :+49 40 8998 93741
>> http://www.desy.de/~jung                                           
>> Tel: +49 (0) 40 8998 3741 (DESY)
>> Tel: +41 22 76 71691 (CERN)       
>> CERN - PH
>> 40-3 B11
>> CH-1211 Genève 23
>> Switzerland
>> ***********************************************************************
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
> 
> 
> -- 
> Dr Andy Buckley
> SUPA Advanced Research Fellow
> Particle Physics Experiment Group, University of Edinburgh
> 
> The University of Edinburgh is a charitable body, registered in
> Scotland, with registration number SC005336.
> 

***********************************************************************
Hannes Jung 
Email: Hannes.Jung at cern.ch
mobile :+49 40 8998 93741
http://www.desy.de/~jung                                           
Tel: +49 (0) 40 8998 3741 (DESY)
Tel: +41 22 76 71691 (CERN)       
CERN - PH
40-3 B11
CH-1211 Genève 23
Switzerland
***********************************************************************