[Rivet] Upcoming paper, and rivet routines from CMS SMP-12-019 (jet mass measurement in dijet and V+jet events)

[Salvatore Rappoccio]

Hi, All,

There was some discussion at the BOOST workshop yesterday about this
measurement's Rivet implementation. One thing that came up was that
there need *not* be a one-to-one paper-to-routine mapping and that
several routines can be made out of one paper. I think this would have
helped enormously in this particular case, and having several
topologies mapped into one routine has slowed this down tremendously.

In the future, I would suggest that the CMS requirements change, and
we allow for a routine for any given topology.

In the short term, we need Nhan's final implementation with the
current "multiple topologies" implementation, which will be
forthcoming soon.

Cheers,
Sal



On Mon, Mar 18, 2013 at 2:18 AM, Albert Knutsson
<albert.knutsson at cern.ch> wrote:
> Hi Salvatore et al,
>
> thanks for your work with writing the rivet plugin.
>
>
> Here are some things that come to my mind:
>
> * Please use rivet 1.8.2 it is available in CMSSW_5_3_9 and CMSSW_6_2_0_pre2
>
> * It looks like you are missing the .aida, .info and .plot files.
> Examples you find here:
> /afs/cern.ch/sw/lcg/external/MCGenerators_hepmc2.06.08/rivet/1.8.1/share/sources/data/anainfo/
> /afs/cern.ch/sw/lcg/external/MCGenerators_hepmc2.06.08/rivet/1.8.1/share/sources/data/plotinfo/
> /afs/cern.ch/sw/lcg/external/MCGenerators_hepmc2.06.08/rivet/1.8.1/share/sources/data/refdata/
>
> * Please also try take a look at Rivet coding conventions and the feed back
> from the rivet developers:
> https://twiki.cern.ch/twiki/bin/viewauth/CMS/Rivet#General_feedback_to_CMS_from_the
> http://projects.hepforge.org/rivet/trac/wiki/CodingStyleGuide
> (The rivet developers are very picky.)
>
> * For the validation CMS needs some validation plots. That is the out put
> from rivet compare to the data.
>
> There are more info on the our rivet twiki about all this.
> https://twiki.cern.ch/twiki/bin/viewauth/CMS/Rivet
>
> Once you feel ready please send the files and plots to me and I will do some
> tests.
>
> We can also discuss on skype/vidyo if you need some more guidance/help.
>
>
> Cheers,
> Albert
>
>
>
> On 3/15/13 5:52 PM, Salvatore Rappoccio wrote:
>
> Hi, Hannes,
>
> Thanks a lot! Albert, I'll follow the instructions.
>
> Cheers,
> Sal
>
> On Fri, Mar 15, 2013 at 12:49 PM, Hannes Jung <hannes.jung at cern.ch> wrote:
>
> Dear Salvatore et al
>
> I think Albert Knutsson (in cc) is the CMS responsible for Rivet.
> He makes sure that the routines satisfy the standards and are properly
> validated. So I think it is best to get in contact with him and follow
> the advice on the CMS Twiki
> https://twiki.cern.ch/twiki/bin/viewauth/CMS/Rivet
>
> Cheers
> Hannes
>
> On 15.03.2013, at 17:44, Salvatore Rappoccio wrote:
>
> Hi, All,
>
> We (at CMS) have completed a measurement of the jet mass in dijet and
> V+jet events. We have a Rivet routine for the dijet analysis already
> done (attached) and the V+jets in the works. We will have the data
> uploaded to HEPData very soon.
>
> What are the steps we need to do in order to get this analysis "riveted"?
>
> Thanks,
> Sal, Nhan, Kalanand, David for CMS
> <MC_JETSTRUCTURE-1.cc>_______________________________________________
> Rivet mailing list
> Rivet at projects.hepforge.org
> http://www.hepforge.org/lists/listinfo/rivet
>
>
> ***********************************************************************
> Hannes Jung
> Email: Hannes.Jung at desy.de
> mobile :+49 40 8998 93741
> http://www.desy.de/~jung
> Tel: +49 (0) 40 8998 3741
> Fax: +49 (0) 40 8994 3741
> DESY, CMS 01B/02.213
> Notkestr.85, 22603 Hamburg, FRG
> ***********************************************************************
>
>
>
>
>
>