[Rivet] Rivet cannot to be configured with swig

[Kamuran Dilsiz]

Hi Andy,

Thanks for replying on my e-mail. That solved the problem. But, I encountered another one while doing "make install". The error is like below. Could you please help me fix this?

Making install in src
make[1]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src'
Making install in Core
make[2]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core'
Making install in yamlcpp
make[3]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core/yamlcpp'
make[4]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core/yamlcpp'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core/yamlcpp'
make[3]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core/yamlcpp'
make[3]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core'
make[4]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core'
make[3]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core'
make[2]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Core'
Making install in Tools
make[2]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Tools'
make[3]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Tools'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Tools'
make[2]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Tools'
Making install in Projections
make[2]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Projections'
make[3]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Projections'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Projections'
make[2]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Projections'
Making install in Analyses
make[2]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Analyses'
make  install-am
make[3]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Analyses'
make[4]: Entering directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Analyses'
 /bin/mkdir -p '/usr/local/lib'
 /bin/sh ../../libtool   --mode=install /usr/bin/install -c   RivetALICEAnalyses.la RivetATLASAnalyses.la RivetCMSAnalyses.la RivetLHCbAnalyses.la RivetLHCfAnalyses.la RivetTOTEMAnalyses.la RivetCDFAnalyses.la RivetD0Analyses.la RivetHERAAnalyses.la RivetPetraAnalyses.la RivetLEPAnalyses.la RivetRHICAnalyses.la RivetSPSAnalyses.la RivetMiscAnalyses.la RivetMCAnalyses.la '/usr/local/lib'
libtool: install: /usr/bin/install -c .libs/RivetALICEAnalyses.so /usr/local/lib/RivetALICEAnalyses.so
/usr/bin/install: cannot create regular file `/usr/local/lib/RivetALICEAnalyses.so': Permission denied
make[4]: *** [install-libLTLIBRARIES] Error 1
make[4]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Analyses'
make[3]: *** [install-am] Error 2
make[3]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Analyses'
make[2]: *** [install] Error 2
make[2]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src/Analyses'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/afs/cern.ch/user/k/kdilsiz/SHERPA/Rivet-2.5.3/src'
make: *** [install-recursive] Error 1

________________________________________
From: Andy Buckley
Sent: Wednesday, March 29, 2017 12:43 PM
To: Kamuran Dilsiz; Frank Siegert
Cc: Rivet
Subject: Re: [Rivet] Rivet cannot to be configured with swig

Hi Karmuran,

This message means what it says: to build Rivet you need to be using a
fairly modern C++ compiler. If using g++, it will need to be (I think)
version 4.8.5 or later.

The lxplus6 system compiler is older -- in fact it's very old, and the
LHC experiments have *never* used it. The simplest way to get a
compliant system may be to use the new lxplus7 system instead. You can
also manually set up lxplus6 to use newer build tools like the
experiments do, with something like this:

. /cvmfs/sft.cern.ch/lcg/releases/LCG_84/gcc/4.9.3/x86_64-slc6/setup.sh
.
/cvmfs/sft.cern.ch/lcg/releases/LCG_84/Python/2.7.10/x86_64-slc6-gcc49-opt/Python-env.sh

(I think that should be sufficient, but in general there are a lot of
components to a consistent environment)

Hope that helps,
Andy


On 29/03/17 09:33, Kamuran Dilsiz wrote:
> Dear Frank,
>
> I installed Rivet-2.5.3. But, when configuring this version, I am having the following error which I do not know how to fix.
> configure: error: *** A compiler with support for C++11 language features is required.
> ________________________________________
> From: Frank Siegert
> Sent: Wednesday, March 29, 2017 9:44 AM
> To: Kamuran Dilsiz
> Cc: Rivet
> Subject: Re: Rivet cannot to be configured with swig
>
> Hi Kamuran,
> (+ Rivet developer list in CC)
>
> You should be using the most recent version of Rivet, 2.5.3, instead
> of an ancient 1.8.3. This will also solve your swig problem, since
> that is not necessary for the recent Rivet versions anymore.
>
> Last but not least, if you are not familiar with installing programs
> on Unix systems you might want to use the rivet bootstrap script,
> which will perform the installation automatically for you:
> https://rivet.hepforge.org/trac/wiki/GettingStarted
>
> Cheers,
> Frank
>
>
> On 29 March 2017 at 09:23, Kamuran Dilsiz <kamuran.dilsiz at cern.ch> wrote:
>> Dear Frank Siegret,
>>
>> I am using Rivet-1.8.3. I configured it with HepMC and Fastjet, but it also
>> require swig. I installed swig into my lxplus account and tried to
>> configured Rivet with swig. However, it still gives the following error.
>> Could you please help me solve the problem? Thanks in advance.
>>
>>
>> configure: WARNING: cannot find 'swig' program. You should look at
>> http://www.swig.org
>>
>> ./configure: line 18427: test: too many arguments
>>
>> checking if echo "Error: SWIG is not installed. You should look at
>> http://www.swig.org" ; false can make a Python function wrapper... yes
>>
>> checking if the /usr/bin/g++ compiler accepts the -Wno-format flag... yes
>>
>> configure: adding -Wno-format to swig compilation test
>>
>> checking if echo "Error: SWIG is not installed. You should look at
>> http://www.swig.org" ; false is compatible with the /usr/bin/g++ compiler...
>> no
>>
>> configure: error: Can't build Python extension since echo "Error: SWIG is
>> not installed. You should look at http://www.swig.org" ; false is not
>> compatible with /usr/bin/g++. Get a newer SWIG version!
>>
>>
>> Best regards,
>> Kamuran
>>
> _______________________________________________
> Rivet mailing list
> Rivet at projects.hepforge.org
> https://www.hepforge.org/lists/listinfo/rivet
>


--
Dr Andy Buckley, Lecturer / Royal Society University Research Fellow
Particle Physics Expt Group, University of Glasgow